武田機電
奧地利AMO直線光柵尺、AMO編碼器， AMO圓形光柵尺、直AMO線導軌式及高精度數顯表 全新的AMO感應柵是一種獨一無二的新產品。它由LMB測量鋼尺和LMK測量頭構成，LMB測量鋼尺熱溫漂～11PPM,所以無需任何補賞。LMB測量鋼尺用光刻腐蝕法形成磁阻柵格，間距1mm,誤差1μm。LMK測量頭由0.1%精度正弦余弦信號發生器，及正弦余弦和參考信號電感線圈，線圈由腐蝕法制成。 ANO感應柵相當光柵能達到的精度，卻能工作再惡劣的塵埃、潮濕工作環境，又由于在測量尺和測量頭中并無磁性元件，因此它有很強的抗磁場干擾能力，和無磁滯誤差。精度高達±5μm 。AMO感應柵直線位移傳感器有LMI-100開放式結構，LMI-200/300軌道密閉式結構: LMI-100開放式感應柵尺： LMI-200軌道密閉感應柵尺： LMB-100測量鋼尺：柵距1mm，線性±5 /10 /20μm，鋼尺最長30m，溫度系數～11μm/oC.m； LMK-101/102測量頭： 輸出：LMK-101：模擬1Vss ；LMK102 ：TTL 工作溫度：0～70oC； 保護等級：IP67； LMF-200 測量鋼尺：柵距1mm，線性±5 /10 /20μm， 鋼尺長120/170/220/270/320/420/520/620/720/820/920/1020mm，溫度系數～11μm/oC.m； LMK-201/202測量頭： 輸出：LMK-201：模擬1Vss ；LMK202 ：TTL 工作溫度：0～70oC； 產品分類 最新技術AMO圓形系列測量尺 最新技術研發的AMO圓形測量尺是全球環行測量尺直徑做的最大的測量尺,最大可做到2050mm的圓光柵，高精密的測量精度解決了現目前大型轉臺、精密儀器及航天設備上的困惑的測量精度問題,詳細選型資料請點擊資料下載.詳細資料 英文 奧地利AMO導軌式光柵尺 直線形鋼帶式粘貼尺主要特點是：鋼帶尺在測量時不受尺帶上有油、有水、有灰塵顆粒及電磁場影響能在環境惡劣情況下正常使用，并測量精度不受影響�？刮廴炯翱垢g性非常強，是全新測量技術的精密測量尺。目前廣泛用于精密儀器測量、三坐標測量儀、直線電機測量、多維工作臺測量及大型電子PCB設備上測量等。產品詳情請來電咨詢！詳細資料 中文 奧地利AMO圓形光柵尺 AMO圓形測量尺是全球環行測量尺直徑做的最大的測量尺,最大可做到2050mm的圓光柵，高精密的測量精度解決了現目前大型轉臺、精密儀器及航天設備上的困惑的測量精度問題。詳細資料 中文 最新技術AMO直線式系列測量尺 直線形粘貼式測量尺主要特點是：鋼帶尺在測量時不受尺帶上有油、有水、有灰塵顆粒及電磁場影響能在環境惡劣情況下正常使用，并測量精度不受影響�？刮廴炯翱垢g性非常強，是全新測量技術的精密測量尺。目前廣泛用于精密儀器測量、三坐標測量儀、直線電機測量、多維工作臺測量及大型電子PCB設備上測量等。
AMO GmbH is an innovative high tech company, and the world leader in the development and manufacturing of precision Inductive Linear and Angular position feedback and measuring systems. The company, located in upper Austria, was established in 1994 from Victor Vasiloiu and Heinz Eisschiel. A primary goal was to develop linear and rotary encoders based on a new inductive scanning principle of operation, combining the high accuracy of the optoelectronic encoders with the robustness of the magnetic encoders. Our latest generation of products was released 2002, culminating years of research and development, with the introduction of our inductive micro-coil array sensor and related signal processing electronics, and this technology was registered with the AMOSIN?/b> trademark name - as an original measuring method. The AMOSIN?/b> brand is recognized for its unique performance in high accuracy, high speed, wide temperature range, dynamic industrial positioning applications that work even in tough environmental conditions. This basic technology has a large development potential and is the source of the wide variety of AMO products being offered, and our family of products continues to grow. Our products are well suited for the harsh environment of the machine tool industry and other related metalworking machinery, as well as medical, electronic and semiconductor production equipment, printing machines, to include serving the automotive and aerospace industries. To accommodate the rapid growth of the AMO products, our company moved into a new and larger facility in September 2007 in St. Peter am Hart, near Braunau am Inn. AMO has a worldwide distribution network made up of subsidiaries representatives, and distributors.
